Відновлення образу системи/en

1. Log in to the Web-interface

Log in to the Web interface using your login and password. Instructions for working with the Web interface are available at link. Make sure that the system images are available by going to the Backups section and making sure that the Images section contains the created system images.

Backups section

Availability of system images

2. Preparing to restore the system from an image created with Urbackup

In our example, we will restore Windows server 2012r2 installed on a virtual machine, if you have a physical server or PC, the procedure will be the same.

2.1. Downloading a disk to restore the system from an image

First, you need to download the iso image of the disk to restore the system from the image created with Urbackup. To download the recovery disk, follow this link:

Download Recovery Disk

2.2. Write the iso image to a disk or USB flash drive.

Burn the iso image to a disk or write USB flash drive, to write the iso image on USB flash drive from Windows you can use the program Rufus.

3. Restore the system from an image created with Urbackup

3.1. Configure the boot priority in the Bios

Insert the disk into the CD drive of your server or PC on which you will restore the image, or connect the USB flash drive to a free USB port on your server/PC. Go to the Bios or Uefi and set the boot priority so that the USB flash drive boots first.

3.2. Booting the server from a flash drive/disk

After booting your server/PC from a flash drive or disk, you should see the Urbackup menu. In the menu, select "Start UrBackup Restore" and press Enter.

Urbackup menu

Wait for the system to boot and in the window that appears, select "Graphical/modern interface (recommended)" and press Enter.

Graphical/modern interface (recomended)

3.3 Network settings

After the system is fully booted from the flash drive/disk, you must first configure the network, because the system will be restored from the image via the Internet. If your network is configured to receive settings via DHCP, skip this step and go to the next one. If you have static settings, you must configure the network manually. To do this, right-click on the network icon in the right corner and select "Edit Connections". In the window that opens, select "Wired connection 1" and click on the gear icon, go to the "IPv4 Settings" tab, select "Manual" in the "Method" section and enter the network settings. Click "Save" to save the settings.

Setting up a network

3.4. Connecting to the Urbackup backup server

In the "Search for server" section, select "Configure Internet server"

Setting up an Internet server

3.5. Enter the data to connect to the Urbackup backup server

In the "Configure server connection" section, enter the data for connecting to the backup server. You should have received the connection data when you ordered the backup service. If you do not have an email with the connection data, you can find it by reading our instructions for ordering the service backup. In the "Server URL" section, enter the server name, in the "Server restore authentication key" section, enter the restore key, and click "Submit".

Configure server connection

3.6. Enter the username and password for the backup server

In the "Login to server" section, enter your username and password, which you can also find out from the email message after ordering the backup service. Click "Submit" to confirm.

Username and password

3.7. Налаштування відновлення

В "Select client" виберіть клієнта якого хочете відновити, в "Select image" виберіть резервну копію яку хочете відновити, в "Select disk to restore to" виберіть ваш диск на який ви хочете відновити резервну копію. Натисніть "Review" для підтвердження.

Налаштування відновлення

3.8. Підтвердження відновлення образа системи

Підтвердіть відновлення системи з образа натиснувши "Start restore", та дочекайтесь повного відновлення системи.

Підтвердження відновлення системи з образа

Процес відновлення системи

3.9. Перезавантажте ваш сервер або ПК

Перезавантажте ваш сервер або ПК після успішного відновлення образа натиснувши "Restore machine", та вийміть USB флешку/компакт-диск з сервера.

Перезавантажте ваш сервер або ПК