Відновлення образу системи/en: відмінності між версіями

Матеріал з ABC-Server Wiki
← Попереднє редагування
Створена сторінка: Confirm the system recovery from the image by clicking "Start restore" and wait until the system is fully restored.
Немає опису редагування
Мітки: Редагування з мобільного пристрою Редагування через мобільну версію
 
(Не показані 7 проміжних версій 2 користувачів)
Рядок 4: Рядок 4:
|title=Restore the system from an image | ABC-SERVER.COM
|title=Restore the system from an image | ABC-SERVER.COM
|title_mode=append
|title_mode=append
|keywords=system recovery from an image, system recovery from an Urbackup image, system recovery from an image created by Urbackup, system recovery from an image created with Urbackup
|keywords=system recovery from an image, system recovery from an Urbackup image, system recovery from an image created by Urbackup, system recovery from an image created with Urbackup, data backup
|description=Restore the system from an image
|description=Restore the system from an image
}}
}}
Рядок 30: Рядок 30:
<p>
<p>
<!--T:9-->
<!--T:9-->
[[File:urbackup_image1_en.webp|alt=Availability of system images |center|thumb|950px]]
[[File:urbackup_image1new_en.webp|alt=Availability of system images |center|thumb|950px]]
</p>
</p>


Рядок 297: Рядок 297:
<p>
<p>
<!--T:93-->
<!--T:93-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
Confirmation of system recovery from an image
Підтвердження відновлення системи з образа
</div>
</p>
</p>
</div>
</div>
<p>
<p>
<!--T:95-->
<!--T:95-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
[[File:urbackup_image13.webp|alt=Confirmation of system recovery |center|thumb|950px]]
[[File:urbackup_image13.webp|alt=Підтвердження відновлення системи |center|thumb|950px]]
</div>
</p>
</p>


Рядок 313: Рядок 309:
<p>
<p>
<!--T:97-->
<!--T:97-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
System recovery process
Процес відновлення системи
</div>
</p>
</p>
</div>
</div>
<p>
<p>
<!--T:99-->
<!--T:99-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
[[File:urbackup_image14.webp|alt=System recovery process |center|thumb|950px]]
[[File:urbackup_image14.webp|alt=Процес відновлення системи |center|thumb|950px]]
</div>
</p>
</p>


Рядок 329: Рядок 321:
<p>
<p>
<!--T:101-->
<!--T:101-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
3.9. Restart your server or PC
3.9. Перезавантажте ваш сервер або ПК
</div>
</p>
</p>
</div>
</div>
Рядок 337: Рядок 327:
<p>
<p>
<!--T:103-->
<!--T:103-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
Reboot your server or PC after successful image recovery by clicking "Restart machine" and remove the USB flash drive/CD from the server.
Перезавантажте ваш сервер або ПК після успішного відновлення образа натиснувши "Restore machine", та вийміть USB флешку/компакт-диск з сервера.
</div>
</p>
</p>


Рядок 346: Рядок 334:
<p>
<p>
<!--T:105-->
<!--T:105-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
Restart your server or PC
Перезавантажте ваш сервер або ПК
</div>
</p>
</p>
</div>
</div>
<p>
<p>
<!--T:107-->
<!--T:107-->
<div lang="uk" dir="ltr" class="mw-content-ltr">
[[File:urbackup_image15.webp|alt=Restart your server or PC |center|thumb|950px]]
[[File:urbackup_image15.webp|alt=Перезавантажте ваш сервер або ПК |center|thumb|950px]]
</div>
</p>
</p>

Поточна версія на 10:10, 12 червня 2024

Інші мови:


1. Log in to the Web-interface

Log in to the Web interface using your login and password. Instructions for working with the Web interface are available at link. Make sure that the system images are available by going to the Backups section and making sure that the Images section contains the created system images.


Backups section

Availability of system images


2. Preparing to restore the system from an image created with Urbackup

In our example, we will restore Windows server 2012r2 installed on a virtual machine, if you have a physical server or PC, the procedure will be the same.


2.1. Downloading a disk to restore the system from an image

First, you need to download the iso image of the disk to restore the system from the image created with Urbackup. To download the recovery disk, follow this link:

Download Recovery Disk


2.2. Write the iso image to a disk or USB flash drive.

Burn the iso image to a disk or write USB flash drive, to write the iso image on USB flash drive from Windows you can use the program Rufus.


3. Restore the system from an image created with Urbackup


3.1. Configure the boot priority in the Bios

Insert the disk into the CD drive of your server or PC on which you will restore the image, or connect the USB flash drive to a free USB port on your server/PC. Go to the Bios or Uefi and set the boot priority so that the USB flash drive boots first.


3.2. Booting the server from a flash drive/disk

After booting your server/PC from a flash drive or disk, you should see the Urbackup menu. In the menu, select "Start UrBackup Restore" and press Enter.


Urbackup menu

Urbackup menu


Wait for the system to boot and in the window that appears, select "Graphical/modern interface (recommended)" and press Enter.


Graphical/modern interface (recomended)

Graphical/modern interface


3.3 Network settings

After the system is fully booted from the flash drive/disk, you must first configure the network, because the system will be restored from the image via the Internet. If your network is configured to receive settings via DHCP, skip this step and go to the next one. If you have static settings, you must configure the network manually. To do this, right-click on the network icon in the right corner and select "Edit Connections". In the window that opens, select "Wired connection 1" and click on the gear icon, go to the "IPv4 Settings" tab, select "Manual" in the "Method" section and enter the network settings. Click "Save" to save the settings.


Setting up a network

Setting up your network


Setting up your network 2


Setting up your network 3


3.4. Connecting to the Urbackup backup server

In the "Search for server" section, select "Configure Internet server"


Setting up an Internet server

Setting up an Internet server сервера


3.5. Enter the data to connect to the Urbackup backup server

In the "Configure server connection" section, enter the data for connecting to the backup server. You should have received the connection data when you ordered the backup service. If you do not have an email with the connection data, you can find it by reading our instructions for ordering the service backup. In the "Server URL" section, enter the server name, in the "Server restore authentication key" section, enter the restore key, and click "Submit".


Configure server connection

Configure server connection


3.6. Enter the username and password for the backup server

In the "Login to server" section, enter your username and password, which you can also find out from the email message after ordering the backup service. Click "Submit" to confirm.


Username and password

Username and password


3.7. Configure restore

In "Select client", select the client you want to restore, in "Select image", select the backup you want to restore, in "Select disk to restore to", select your disk to which you want to restore the backup. Click "Review" to confirm.


Configure restore

Configure restore


3.8. Confirmation of system image recovery

Confirm the system recovery from the image by clicking "Start restore" and wait until the system is fully restored.


Confirmation of system recovery from an image

Confirmation of system recovery


System recovery process

System recovery process


3.9. Restart your server or PC

Reboot your server or PC after successful image recovery by clicking "Restart machine" and remove the USB flash drive/CD from the server.


Restart your server or PC

Restart your server or PC

Отримано з https://wiki.abc-server.com/index.php?title=Відновлення_образу_системи/en&oldid=4076